Deepgrove (Directions)
|
Driving directions are no longer maintained.
This page about Deepgrove is now obsolete. It is part of a wiki project that was active during 2020/2021. Since 2022, driving directions are being replaced by location descriptions on city pages. For more information, see:
|
Deepgrove has sawmills, depots and logging sites throughout the Pacific Northwest and the Rocky Mountains.
Our logging areas are usually signed from the nearest highway, but some have turns that are easy to miss and driving through the forests at night can be dangerous. We operate all sites 24/7, but recommend you arrive during daylight hours.
How to find us:
Aberdeen, WA: Depot
Aberdeen, WA: Timber Harvest Site
Follow the US-101 between Aberdeen and Astoria. The site is located on the east side of the road down a dirt track, and is signposted from both approaches.
Astoria, OR: Depot
Follow US-101 to the Wallbert depot about 4 miles south of Astoria, then leave the highway and head west into the forest. Our depot is located on the right side of the road.
Astoria, OR: Timber Harvest Site
Travel on US-30 connecting Astoria and Longview. Leave the highway at the Deepgrove sign. In the forest, where the logging road splits, keep to the right.
Bellingham, WA: Depot
From I-5, take the exit for Bakerview Road and turn towards the airport. Our depot will be at the end of the road, on the left side.
Bellingham, WA: Timber Harvest Site
Bend, OR: Sawmill
Our sawmill is located in the forest south of Bend, close to the town of Crescent, on the West side of US-97. Follow the Deepgrove signs at the intersection approx. 25 miles outside Bend / approx. 10 miles outside Crescent. You'll find our facility on the left side of the road.
Ignore the Deepgrove sign pointing to the East. This leads downhill to one of our logging sites.
Bend, OR: Timber Harvest Site
Take US-97 to the town of Crescent, approx. 35 miles south of Bend. At the intersection by the Bigfoot restaurant in the center of Crescent, turn East to reach our logging area.
Boise, ID
From I-84 take exit 57 and go North on ID-21, then take the next left at Federal Way. Once you cross the R.R tracks our facility will be the next left.
Coeur d'Alene, ID
Follow US-95 south of Coeur d'Alene. At the minor intersection with Putnam Rd, turn West onto the unpaved farm road (opposite Putnam Road). The logging site is in the hills behind the farm.
Colville, WA
Coos Bay, OR
Approaching Coos Bay from the south, simply turn right at the first traffic signal. Coming from the north, go past the Wallbert supermarket south of downtown, then turn left at the second signal. Our depot is located straight ahead past the level crossing.
Grangeville, ID: Sawmill
Our facility is located just North of the city on US 95.
Grangeville, ID: Timber Harvest Site
From the South: From US 95 take ID 13 North in Grangeville follow until US 12 turn West. Take the next right and the next immediate right. Follow the winding road a few miles and turn left onto the dirt road.
From the North: Follow US 12 East out of Lewiston follow through the small town of Kamiah. Once you cross the river out of Kamiah. Take the left and an immediate right. Follow the winding road a few miles and turn left onto the dirt road
Jackson, WY
To reach Deepgrove in south Jackson, follow the highway until the High School Road intersection (by the big "country store" sign). Turn onto High School Road, then turn right after the creek bridge.
Kalispell, MT
- ⚠️ The directions in this section need verification.
The sawmill is located in Columbia Falls, or just north of this city. On US 2, you must turn right near garage.
Klamath Falls, OR
Follow US-97 until the weigh station just north of Klamath Falls. At the intersection immediately after the weight station, turn west. Turn left after the bridge. Our facility is on the right side of the street, after about one block.
Lakeview, OR
Travel on the common section of US-395 and OR-140. Coming from the south, turn left at the first intersection after the common section begins; coming from the north, turn right just past the "Welcome to Lakeview" figure. Our facility is located on the left side of the side street.
Laurel, MT
- ⚠️ The directions in this section need verification.
On Interstate 90, if you are going to Bozeman or Butte, turn your right side. The depot is located near Johnson & Smith supply depot. Two connections are entering to the depot: near Johnson & Smith supply depot and from this depot.
Longview, WA: Depot
Follow signs for Longview Port, West Docks.
Longview, WA: Timber Harvest Site
The logging area is located near US-12 towards Yakima, approx. 25 miles from interstate 5 north-east of Longview.
Medford, OR: Sawmill
Take exit 30 (N. Medford) from I-5 and turn onto OR-62 West. Our sawmill is located on the right side of the road, after the railway bridge. Access is through the side street at the traffic signal.
Medford, OR: Timber Harvest Site
Travel on US-199 connecting Grants Pass (I-5 exit 55) and Crescent City on the Pacific Coast. Our logging area is located south of the highway, approx. 30 miles from the interstate interchange at Grants Pass. Follow the signage for Deepgrove on logging roads through the forest to our timber loading site.
Missoula, MT: Sawmill
- ⚠️ The directions in this section need verification.
Travel on MT 200, turn left and you will enter Bonner-West Riverside. Then turn left or left near weigh station and you will enter a depot via hidden road.
Missoula, MT: Timber Harvest Site
- ⚠️ The directions in this section need verification.
Travel on MT 200, turn left and you will enter Bonner-West Riverside. There are two several connections that running to timber harvest site.
Montrose, CO
On the US-50, turn down 6530 Road next to the truck service. Our facility is located on the left a mile down the road.
Newport, OR: Sawmill
Travel on US-20 connecting Newport to I-5 at Albany. Approx. 12 miles outside Newport, follow the sign towards Toledo, then turn right at the first intersection. Our depot is located at the end of the road.
Newport, OR: Timber Harvest Site
Travel on US-20 connecting Newport to I-5 at Albany. The logging road North to our timber loading site connects to the highway Northeast of Toledo (approx. 17 miles outside Newport / 35 miles outside Albany).
Olympia, WA
Pendleton, OR
Take exit 207 (W. Pendleton) from I-84 and turn West towards the industrial area. Follow the Old Pendleton Road until you reach residential homes, then turn left onto the dirt road opposite a white travel trailer. Our facility is located on the left side of the dirt road.
Port Angeles, WA
Heading East, turn right after you pass the "Port Angeles Welcomes You" sign. And our facility is on the right.
Heading West, go through town and stay on the Truck Route. Once you join back onto US-101 take the next left. And our facility is on the right.
Pueblo, CO
From I-25 take exit 97, go West. Turn right at the stop sign, take the next right at Northern Ave. Follow Northern Ave, our facility will be on the right across from Avalanche Steel.
Redding, CA
Our facility is located just off of the CA-299, 10 miles east of I-5
Salem, OR
Travel on US-20 connecting Bend to I-5 at Albany. The logging road North to our timber loading site connects to the highway right at the crest of the Cascade Range (approx. 30 miles outside Bend / 55 miles outside Albany).
Sandpoint, ID 
There are two separate Deepgrove facilities around Sandpoint.
The sawmill is located on Baldy Mtn Rd. From the joint section of US 2/95, turn west onto Schweitzer Cutoff. Turn left at the roundabout, then right after the railroad crossing. The sawmill will be to the left. There is a rest spot in the timber yard.
To reach the timber harvest site, continue west on Baldy Mtn Rd into the forest, then veer right onto the logging road at the small Deepgrove sign.
Steamboat Springs, CO
From US-40, take CO-131 South, and then follow that road. As you reach the bottom of the long grade, watch for the "Log Trucks" sign. Right past this sign, you will see the sign for Deepgrove. Make that left, and follow signs to the timber site.
Thompson Falls, MT: Depot
- ⚠️ The directions in this section need verification.
On MT 200, near Johnson & Smith work site, turn left. Turn left or right and you will enter the Depot.
Thompson Falls, MT: Timber Harvest Site
- ⚠️ The directions in this section need verification.
On MT 200, near Johnson & Smith work site, turn left. Turn left or right and you will enter the Timber Harvest Site.