HMS Machinery (Directions)
|
Driving directions are no longer maintained.
This page about HMS Machinery is now obsolete. It is part of a wiki project that was active during 2020/2021. Since 2022, driving directions are being replaced by location descriptions on city pages. For more information, see:
|
HMS Machinery has facilities all over the country.
How to find us:
Alamosa, CO
Follow US 160 East until the Driver gas station. HMS Machinery is located on the back of the adjacent truck service station.
Albuquerque, NM
From I-40 take exit 157 and head South on 12th St. Our shop is on the right, immediately after the railroad crossing.
Barstow, CA
Coeur d'Alene, ID
Our facility is located at 19255 Seltice Way. Take exit 11 from I-90 and head South on Northwest Blvd, then take the first right.
Eureka, CA
Everett, WA
From I-5 heading North take exit 193 head towards Everett City Center. Turn left at the stop sign, at the light turn right. Turn left onto Everett Ave, then right onto Broadway. Stay right towards Marysville then immediate exit left and head back towards Everett. Once you cross the bridges our entrance will be on the right.
From US-2 follow toward Everett and turn right at the T intersection. Then left onto Broadway. Follow directions above.
From I-5 heading South take exit 198, once you cross the bridges our entrance will be on the right.
Farmington, NM
Our depot is located on the US-64 truck bypass / Murray Drive, just East of the intersection with Miller Street.
Flagstaff, AZ
The HMS depot for the Flagstaff district is located on Historic Route 66 just outside the small town of Seligman, about an hour west of Flagstaff proper. The depot is conveniently located close to interstate 40, exit 121.
Grangeville, ID
Turn onto County Road, just North of the US95 and ID 13 intersection our facility is just past the Farmers Barn.
Great Falls, MT
- ⚠️ The directions in this section need verification.
On US 87 Business Pass, turn right, then left near garage.
Idaho Falls, ID
Take exit 119 from I-15 and follow signs for the airport. Turn right after the GP gas station, then right again.
Kingman, AZ
Take exit 1 from I-40 and follow sign to the business park. Our facility will be at the end of the road.
Los Angeles, CA
Missoula, MT
- ⚠️ The directions in this section need verification.
On Interstate 90 Business, passing through Sell Goods, turn right. Then turn left and left again.
Page, AZ
Our facility is located on Lake Powell Boulevard, next to the gas station.
Pendleton, OR
Take exit 207 (W. Pendleton) from I-84 and turn onto US-30 East towards the City Center. Turn left at the first intersection. Our facility is located on the left side of the road.
Port Angeles, WA
Heading into town from the East side, head straight through town onto the truck route. Turn left onto Tumwater Truck Rd and our shop is on the right.
From the West end. Stay onto US-101 into town and go straight at First St, then turn left onto Front St. Turn left onto Tumwater Truck Rd and our shop is on the right.
Pueblo, CO
Arriving on I-25, take exit 104 for Drew Dix Parkway and turn West towards the city. Then follow signage towards our plant.
Arriving on US-50 W, follow signs for I-25 N toward Colorado Springs and follow directions above.
Arriving on US-50 E, turn left onto Elizabeth St. and our plant will be on the left.
Riverton, WY
From downtown Riverton, head towards Shoshoni. HMS will be on the left side as you leave the city.
Rock Springs, WY
HMS Machinery is located on Elk Street / US-191 to Farson, just before the Rock Springs city limit on the east side of the street.
Salina, UT
From I-15 take exit 188 and follow US-50 East, continue to the T intersection, and go right. Turn left after the Farmers Barn. Our facility is on the right.
From I-70 Take exit 56 and follow US-89 North. Turn left towards the Industrial Park. Our facility is on the left.
San Diego, CA
San Rafael, CA
Sandpoint, ID 
Heading North on US-95 continue past Sandpoint, go west at the light onto Schweitzer Cutoff. Take the second exit in the roundabout, then take the immediate right after the train tracks onto Baldy Mtn RD. Our shop will be on your right.
Santa Cruz, CA
Santa Fe, NM
Take exit 282B from I-25, then turn left at the first signal. Our depot is on the right side of the street, after about one block.
Beware of the level crossing—the barriers go down very quickly after the lights begin to flash.
Coming from the North on US-84, take the Santa Fe Relief Route (SH 599). Turn left to join I-25 NB, then proceed as above.
Steamboat Springs, CO
Tacoma, WA
Take exit 136 from I-5 for Port of Tacoma and follow signs for 20th street. Turn left on 20th street and our plant is on the left just past the Peterbilt dealership.
Vernal, UT
Wenatchee, WA
From US-2, follow signs for SH 285 South and take the first left onto Hawley Street, then take the next right after passing over the train tracks. Our plant will be on the left just after the intersection.